Best Material for Lino Printing - Traditional Lino or SoftCut?

A variety of different lino printing surfaces

When most people come across lino printing, they start with a traditional lino block, but there are a variety of different surfaces available that you can use for lino printing. Once you start investigating all the different lino surfaces, it can become quite confusing.

In this blog post, I set out the pros and cons of each material to help you decide what you would like to use in your printmaking. I compared Traditional Lino, SoftCut by Essdee, Speedy-Carve by Speedball and Japanese Vinyl.

Table of Contents

Traditional Lino

SoftCut by Essdee

Speedy-Carve by Speedball

Japanese Vinyl

Which material should you use for your lino printing?

Traditional Lino

Traditional lino block

What is traditional lino made from?

A traditional lino block is grey in colour and backed with hessian. It has a woven structure. It can degrade over time, so you need to make sure the lino you are using is soft, fresh and has a pleasant smell.

Traditional lino is a natural, plant based material, making it much better for the environment than other surfaces.

What are the benefits of using traditional lino?

It is very easy to transfer your design onto lino and pencil lines show up really well.

It can be harder to carve than some of the softer options, such as Essdee Softcut, but the carved lines are crisp, making traditional lino a favourite of professional printmakers.

It is advisable to warm up the lino to soften it up and make it easier to carve. The best method I have found to warm up the lino is to use a hairdryer. Warming up the lino also reduces the chances of it cracking.

Pros of using traditional lino

  • Relatively cheap

  • Better for the environment than other materials

  • Very easy to draw your design on with a pencil

  • Crisp lines when carving

Cons of using traditional lino

  • Degrades over time and becomes unusable

  • Warps when washed

  • Ideally needs to be warmed up before carving

  • Difficult to cut with a craft knife

  • Can require more prep than other materials (see Helpful tips below)

Traditional lino is best for: Professional prints and the environmentally conscious

Helpful tips when using traditional lino: 

Traditional lino given an acrylic wash
  • It’s possible to easily warm up the lino using a hairdryer.

  • Once your design is on the lino, paint the lino with a layer of acrylic wash (watered down acrylic paint in any colour). This makes it easier to see your design as you carve.

  • Coat the back of the lino with Liquitex Acrylic Gloss Medium before you carve, this stops the lino from warping when you wash it after printing. 

  • If you have a printing press, you can put warped lino under your printing press to flatten it. 

Essdee SoftCut

Essdee SoftCut lino block

What is Essdee SoftCut made from?

SoftCut is a manmade rubber-like material manufactured by Essdee as a great alternative to traditional hessian-backed lino.

As SoftCut is made from plastic, it is not as good for the environment as traditional lino, however, you can buy SoftCut in bulk without worrying that it will degrade over time.

What are the benefits of using Essdee SoftCut?

It is formulated to be extremely easy to carve, making it appealing to a wider range of users than traditional lino.

This is a great material for beginners, as carving is lovely and smooth. Although, it is also popular with more experienced printmakers too. A finished design carved into SoftCut will last for years.

Pros of using Essdee SoftCut

  • Easier to carve without much effort

  • Easy to clean

  • Lasts a long time

Cons of using Essdee SoftCut

  • Made from plastic, so it is not as environmentally friendly as traditional lino

  • More expensive than traditional lino

  • Transferring images can smudge

  • Easier to slip and make mistakes

  • Lines are not as crisp as on traditional lino

Essdee SoftCut is best for: Beginners

Speedy-Carve by Speedball

Speedball Speedy Carve Lino Block

What is Speedy-Carve made from?

Similar to SoftCut, Speedy-Carve is made from rubber.

As it is manmade, it is not as good for the environment as traditional lino, however, you can buy Speedy-Carve in bulk without worrying that it will degrade over time.

What are the benefits of using Speedy-Carve?

As with SoftCut, Speedy-Carve is softer and easier to carve than traditional lino. The surface is flexible and durable and will not crack, crumble or break.

This material is a lot thicker than all the other materials, which makes it ideal for stamps (when you are holding the lino and stamping it onto paper, as opposed to laying the lino flat and smoothing your paper over the design).

Speedy-Carve is the most expensive of the materials and the thickness of it means that it is the worst from an environmental perspective.

Pros of using Speedy-Carve

  • Easier to carve than traditional lino

  • Easy to cut to size with a craft knife

  • Great for making stamps

  • Easy to clean

  • Lasts a long time

Cons of using Speedy-Carve

  • Made from plastic, so it is not as environmentally friendly as traditional lino

  • Very expensive (particularly in the UK)

  • Transferring images can smudge

Speedball Speedy-Carve is best for: Making Stamps

Japenese Vinyl

Japanese Vinyl lino printing block

What is Japenese Vinyl?

Japenese Vinyl is a manmade double sided material that is blue on one side, green on the other and black in the middle.

You can carve on either side. It is softer than traditional lino, but not as soft as SoftCut or Speedy-Carve.

What are the benefits of using Japenese Vinyl?

Japanese Vinyl does not degrade over time, the way traditional lino does.

Carved lines are crisper than SoftCut or Speedy Carve.

For these two reasons, Japanese Vinyl is a great alternative to traditional lino for experienced or professional printmakers. There is a sheen to the material, which I find makes it difficult to transfer a design to be carved, which is a drawback.

Pros of Japenese Vinyl

  • Easier to carve than traditional lino, but retains its shape better than SoftCut or Speedy-Carve

  • Easy to clean

  • Very durable

Cons of Japenese Vinyl

  • Can be hard to cut to size

  • Can be difficult to transfer a design onto it

  • More expensive than traditional lino

  • It is a manmade material, so it is not as environmentally friendly as traditional lino

Japanese Vinyl is best for: Professional prints

Which material should you use for your lino printing?

As you can tell from this blog post, each material is suitable for a different purpose, depending on what you would like to create and how experienced you are with lino printing.

I would recommend Essdee SoftCut for beginners as it’s so pleasant to carve. As I have been printing for a while, I often use Japanese Vinyl as I feel it keeps the shape better than SoftCut. If I am making stamps, I use Speedy-Carve. Traditional Lino is also a favourite as I’m conscious of the environment and like to use natural materials as much as possible.

I hope you have found this information useful. If you have any other tips you think I should include in the post, please feel free to email me at sarahransomeart@gmail.com, I would live to hear your thoughts.

Previous
Previous

Easy craft ideas for kids – Vincent van Gogh inspired art

Next
Next

How to Spend a Day in the City of Gibraltar